School of Engineering

Filter
Conference contribution

Search results

  • 2009

    Temperature measurement of gases using acoustic means

    Moss, B., Leen, G., Lewis, E., Bremer, K. & Niven, A., 2009, 2009 6th International Multi-Conference on Systems, Signals and Devices, SSD 2009. 4956712. (2009 6th International Multi-Conference on Systems, Signals and Devices, SSD 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The effect of computer use on carpal tunnel syndrome

    Donoghue, M. F., O'Reilly, D. & Walsh, M. T., 2009, World Congress on Medical Physics and Biomedical Engineering: Neuroengineering, Neural Systems, Rehabilitation and Prosthetics. 9 ed. Springer Verlag, p. 425-427 3 p. (IFMBE Proceedings; vol. 25, no. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The effects of reynolds number on the aerodynamic performance of geometrically similar fans

    Hanly, K., Grimes, R. & Walsh, P., 2009, 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008. p. 183-191 9 p. (2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The effects on the strength of UBM extracellular matrix under stent loading: An experimental and numerical study

    Callanan, A., Walsh, M. & McGloughlin, T., 2009, Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009. PART B ed. p. 1209-1210 2 p. (Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009; no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The impact of freely suspended particles on laminar boundary layers

    Schmidt, C. & Young, T. M., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-1621. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The influence of realistic arteriovenous (AV) fistula wall shear stress (WSS) on endothelial cell (EC) gene expression - A correlation to intimal hyperplasia development

    Carroll, G. T., Devereux, P. D., Callanan, A., McGloughlin, T. M. & Walsh, M. T., 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART A ed. p. 69-70 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The influence of the Pb-free solder alloy composition and processing parameters on thermal fatigue performance of a ceramic chip resistor

    Coyle, R., Reid, M., Ryan, C., Popowich, R., Read, P., Fleming, D., Collins, M., Punch, J. & Chatterji, I., 2009, 2009 Proceedings 59th Electronic Components and Technology Conference, ECTC 2009. p. 423-430 8 p. 5074048. (Proceedings - Electronic Components and Technology Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermally induced flow structures in aircraft wing compartments

    Newport, D., Egan, V., Aguanno, M., Lacarac, V., Estebe, B. & Murer, V., 2009, 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008. p. 299-306 8 p. (2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Velocity field measurements in leading edge wing compartments

    Egan, V., Newport, D. T., Larcarac, V. & Estebe, B., 2009, 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008. p. 281-291 11 p. (2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2008

    A comparative study of genetic algorithm components in simulation-based optimisation

    Can, B., Beham, A. & Heavey, C., 2008, Proceedings of the 2008 Winter Simulation Conference, WSC 2008. p. 1829-1837 9 p. 4736272. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A comparison of measurement and modelling of plastically induced residual stresses in a 316H and a weld 347 stainless steel

    Turski, M., Wimpory, R. C., O'Dowd, N. P., Withers, P. J. & Nikbin, K. M., 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8. p. 89-98 10 p. (2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A comprehensive shear-testing facility for joint-scale solder samples

    Herkommer, D., Reid, M. & Punch, J., 2008, EuroSimE 2008 - International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems. 4525011. (EuroSimE 2008 - International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Acoustic emissions from active cooling solutions for portable devices

    Walsh, E. J., Walsh, P. A., Grimes, R. & Punch, J., 2008, 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM. p. 464-470 7 p. 4544306. (2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A global bolted joint model for finite element simulations of large-scale composite structures

    Gray, P. J. & McCarthy, C. T., 2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Civil-Comp Press, Vol. 88.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A Multiplicative AF Kinematic Hardening Model

    Kourousis, K., Saridis, G. J. & Dafalias, Y. F., 2008, Proceedings of 12th International Conference Fatigue and Plasticity: from Mechanisms to Design. Paris, France

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A multi-stress screen for corrosion-susceptible chip resistors

    Reid, M., Dalton, E., Punch, J., Derkits, G. E., Reents, W. D., Fleming, D. A., Franey, J. P. & Xu, C., 2008, 17th International Corrosion Congress 2008: Corrosion Control in the Service of Society. p. 1190-1200 11 p. (17th International Corrosion Congress 2008: Corrosion Control in the Service of Society; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Analysis of multiple process flows in an asic fab with a detailed photolithography area model

    Kabak, K. E., Heavey, C. & Corbett, V., 2008, Proceedings of the 2008 Winter Simulation Conference, WSC 2008. p. 2185-2193 9 p. 4736318. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Analysis of shock pulses from a small velocity amplifier

    Kelly, G., Punch, J., Goyal, S. & Sheehy, M., 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. p. 782-791 10 p. (Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • An experimental study on the performance of miniature heat sinks for forced convection air cooling

    Egan, V., Stafford, J., Walsh, P., Walsh, E. & Grimes, R., 2008, 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM. p. 497-509 13 p. 4544310. (2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A three-dimensional damage model for composites with non-linear shear behaviour

    McCarthy, C. T. & O'Higgins, R., 2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Civil-Comp Press, Vol. 88.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Centre of gravity movement as redundant pitch attitude control in control allocation

    Ahmad, H., Young, T. M., Toal, D. & Omerdic, E., 2008, AIAA Guidance, Navigation and Control Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc., 2008-7430. (AIAA Guidance, Navigation and Control Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Development of a statistically equivalent representative volume element for a fibre reinforced composite

    Vaughan, T., McCarthy, C. & Soutis, C., 2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Civil-Comp Press, Vol. 88.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Development of Plasticity Model for Steel Ratcheting Simulation

    Kourousis, K. & Lappas, I., 2008, Proceedings of Aircraft Structural Integrity Program (ASIP) Conference 2008. USA

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Development of statistically equivalent representative volume elements for multi-scale modeling of composite materials

    Vaughan, T. & McCarthy, C., 2008, Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008. El-Azab, A. (ed.). Department of Scientific Computing, Florida State University, p. 323-326 4 p. (Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Effects of interfacial position on drag reduction in a superhydrophobic microchannel

    Enright, R., Dalton, T., Krupenkin, T. N., Kolodner, P., Hodes, M. & Salamon, T. R., 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART A ed. p. 835-845 11 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Energy efficient liquid cooling

    Punch, J., 2008, EuroSimE 2008 - International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems. 4525110. (EuroSimE 2008 - International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evaluation of two-parameter approaches to describe crack tip fields in engineering structures

    Kamel, S., O'Dowd, N. P. & Nikbin, K. M., 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - Materials and Fabrication. p. 3-14 12 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evolutionary metamodelling of discrete-event simulation models

    Can, B., Murphy, G. & Heavey, C., 2008, 20th European Modeling and Simulation Symposium, EMSS 2008. p. 87-94 8 p. (20th European Modeling and Simulation Symposium, EMSS 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fracture assessment procedures for steel pipelines using a modified reference stress solution

    Tkaczyk, T., O'Dowd, N. P. & Nikbin, K., 2008, ASME 2008 Pressure Vessels and Piping Conference, PVP2008. PARTS A AND B ed. p. 1243-1257 15 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Influence of token rotation time in multi master PROFIBUS networks

    Kaghazchi, H., Li, H. & Ulrich, M., 2008, WFCS 2008 - 2008 7th IEEE International Workshop on Factory Communication Systems Proceedings. p. 189-197 9 p. 4638706. (IEEE International Workshop on Factory Communication Systems - Proceedings, WFCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • In-situ monitoring of carbon dioxide emissions from a diesel automobile using a mid-infrared optical fibre based point sensor

    Dooly, G., Mulrooney, J., Merlone-Borla, E., Flavia, G., Clifford, J., Fitzpatrick, C. & Lewis, E., 2008, 2008 IEEE International Instrumentation and Measurement Technology Conference Proceedings, I2MTC. p. 1891-1894 4 p. 4547355. (Conference Record - IEEE Instrumentation and Measurement Technology Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • In-situ optical creep observation and constitutive modelling of joint-scale SAC solder shear samples

    Herkommer, D., Reid, M. & Punch, J., 2008, 10th Electronics Packaging Technology Conference, EPTC 2008. p. 506-515 10 p. 4763484. (10th Electronics Packaging Technology Conference, EPTC 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Microchannel fluorescent melting curve analysis

    Kinahan, D. J., Dalton, T. M. & Davies, M. R., 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART B ed. p. 1579-1585 7 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Monitoring of environmentally hazardous exhaust emissions from cars using optical fibre sensors

    Lewis, E., Clifford, J., Fitzpatrick, C., Dooly, G., Zhao, W., Sun, T., Grattan, K., Lucas, J., Degner, M., Ewald, H., Lochmann, S., Bramann, G., Merlone-Borla, E. & Gili, F., 2008, Embedded Computer Systems: Architectures, Modeling, and Simulation - 8th International Workshop, SAMOS 2008, Proceedings. p. 238-247 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5114 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Numerical investigation to examine the effect of introducing a crack in a residual stress field

    Kamel, S., O'Dowd, N. P. & Nikbin, K. M., 2008, ASME 2008 Pressure Vessels and Piping Conference, PVP2008. PARTS A AND B ed. p. 117-124 8 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre

    Clifford, J., Mulrooney, J., Dooly, G., Fitzpatrick, C., Lewis, E., Merlone-Borla, E. & Flavia, G., 2008, 2008 IEEE Sensors, SENSORS 2008. p. 914-918 5 p. 4716590. (Proceedings of IEEE Sensors).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • On the performance of miniature centrifugal fans with varying blade cord length

    Walsh, P. A., Walsh, E. & Grimes, R., 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART B ed. p. 1389-1397 9 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Overview of the OPTO-EMI-SENSE project: Optical fibre sensor network for automotive emission monitoring

    Lewis, E., Dooly, G., Hawe, E., Fitzpatrick, C., Chambers, P., Clifford, J., Zhao, W. Z., Sun, T., Grattan, K. T. V., Lucas, J., Degner, M., Ewald, H., Lochmann, S., Bramann, G., Gili, F. & Merlone-Borla, E., 2008, Sensors: Advancements in Modeling, Design Issues, Fabrication and Practical Applications. p. 179-196 18 p. (Lecture Notes in Electrical Engineering; vol. 21 LNEE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual stress and microstructural variations in thick aluminium alloy forgings

    Robinson, J. S., Truman, C. E., Hossain, S. & Wimpory, R., 2008, Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation - Selected, peer reviewed papers from the Int. Conf. on Stress Evaluation Using Neutrons and Synchrotron Radiation Proceedings. Pyzalla, A. R., Borbely, A. & Degischer, H. P. (eds.). Trans Tech Publications Ltd, p. 45-50 6 p. (Materials Science Forum; vol. 571-572).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The effect of matrix non-linearity on the properties of unidirectional composite materials for multi-scale analysis

    Keane, A., McCarthy, C. T. & O'Dowd, N. P., 2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Civil-Comp Press, Vol. 88.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • THE effect of residual stress and microstructure on distortion in thin welded steel plates

    Davies, C. M., Lightfoot, M. P., O'Dowd, N. P., Wimpory, R. C., Dye, D., Bruce, G. J., Béreš, M., Oliver, E. & Nikbin, K. M., 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - Materials and Fabrication. p. 851-858 8 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The extended finite element method: A review

    Cahill, L., McCarthy, C. & Bordas, S., 2008, Proceedings of the 6th International Conference on Engineering Computational Technology. (Proceedings of the 6th International Conference on Engineering Computational Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The failure mechanisms of micro-scale cantilevers in shock and vibration stimuli

    Sheehy, M., Reid, M., Punch, J., Goyal, S. & Kelly, G., 2008, DTIP of MEMS and MOEMS - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. p. 2-7 6 p. 4752940. (DTIP of MEMS and MOEMS - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access

  • The performance of active cooling in a mobile phone

    Walsh, E., Grimes, R. & Walsh, P., 2008, 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM. p. 44-48 5 p. 4544252. (2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The response of micro-scale devices subject to high-g impact stimuli

    Sheehy, M., Lishchynska, M., Punch, J., Goyal, S. & Kelly, G., 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. p. 355-362 8 p. (Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermal resistance measurements from a microchannel fluorescent melting curve analysis platform

    Kinahan, D. J., Dalton, T. M. & Davies, M. R., 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART A ed. p. 489-498 10 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The smoothed extended finite element method

    Natarajan, S., Bordas, S., Minh, Q. D., Nguyen, H. X., Rabczuk, T., Cahill, L. & McCarthy, C., 2008, Proceedings of the 6th International Conference on Engineering Computational Technology. (Proceedings of the 6th International Conference on Engineering Computational Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2007

    A computational investigation of blood flow in realistic AAA stent-grafts

    Molony, D. S., Doyle, B. J., Callanan, A., Morris, L. G., Walsh, M. & McGloughlin, T. M., 2007, Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007. American Society of Mechanical Engineers (ASME), p. 497-498 2 p. (Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Analysis of high acceleration shock pulses part I: Geometry of incident mass

    Kelly, G., Sheehy, M., Rodgers, B., Punch, J. & Goyal, S., 2007, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 943-952 10 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Analysis of high acceleration shock pulses part II: Pulse shaper material

    Sheehy, M., Kelly, G., Rodgers, B., Punch, J. & Goyal, S., 2007, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 1236-1243 8 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review