Comparison of silicon nitrides with carbon additions prepared by two different sintering methods

Cs Balázsi; E. Dolekcekic; Zs Kövér; F. Wéber; S. Hampshire; P. Arató

doi:10.4028/0-87849-973-3.242

Comparison of silicon nitrides with carbon additions prepared by two different sintering methods

Cs Balázsi, E. Dolekcekic, Zs Kövér, F. Wéber, S. Hampshire, P. Arató

Retired Staff

Research output: Contribution to journal › Article › peer-review

Abstract

In this work partially and fully densified silicon nitride based composites have been prepared using carbon black and graphite additions. Alumina and yttria sintering additives were also added to silicon nitride starting powders. Sinter-HIP and pressure-less sintering (PLS) have been employed for composite processing. The effects of carbon nano- and micro-grains on the microstructure, bending strength and hardness have been investigated. Higher strengths could be achieved by HIP, whereas more homogeneous properties can be assured by PLS.

Original language	English
Pages (from-to)	242-245
Number of pages	4
Journal	Key Engineering Materials
Volume	290
DOIs	https://doi.org/10.4028/0-87849-973-3.242
Publication status	Published - 2005

Keywords

Bioceramic
Mechanical properties
Porosity
Silicon nitride

Access to Document

10.4028/0-87849-973-3.242

Cite this

@article{6657378660cb44fa957b784f051ff455,

title = "Comparison of silicon nitrides with carbon additions prepared by two different sintering methods",

abstract = "In this work partially and fully densified silicon nitride based composites have been prepared using carbon black and graphite additions. Alumina and yttria sintering additives were also added to silicon nitride starting powders. Sinter-HIP and pressure-less sintering (PLS) have been employed for composite processing. The effects of carbon nano- and micro-grains on the microstructure, bending strength and hardness have been investigated. Higher strengths could be achieved by HIP, whereas more homogeneous properties can be assured by PLS.",

keywords = "Bioceramic, Mechanical properties, Porosity, Silicon nitride",

author = "Cs Bal{\'a}zsi and E. Dolekcekic and Zs K{\"o}v{\'e}r and F. W{\'e}ber and S. Hampshire and P. Arat{\'o}",

year = "2005",

doi = "10.4028/0-87849-973-3.242",

language = "English",

volume = "290",

pages = "242--245",

journal = "Key Engineering Materials",

issn = "1013-9826",

}

TY - JOUR

T1 - Comparison of silicon nitrides with carbon additions prepared by two different sintering methods

AU - Balázsi, Cs

AU - Dolekcekic, E.

AU - Kövér, Zs

AU - Wéber, F.

AU - Hampshire, S.

AU - Arató, P.

PY - 2005

Y1 - 2005

N2 - In this work partially and fully densified silicon nitride based composites have been prepared using carbon black and graphite additions. Alumina and yttria sintering additives were also added to silicon nitride starting powders. Sinter-HIP and pressure-less sintering (PLS) have been employed for composite processing. The effects of carbon nano- and micro-grains on the microstructure, bending strength and hardness have been investigated. Higher strengths could be achieved by HIP, whereas more homogeneous properties can be assured by PLS.

AB - In this work partially and fully densified silicon nitride based composites have been prepared using carbon black and graphite additions. Alumina and yttria sintering additives were also added to silicon nitride starting powders. Sinter-HIP and pressure-less sintering (PLS) have been employed for composite processing. The effects of carbon nano- and micro-grains on the microstructure, bending strength and hardness have been investigated. Higher strengths could be achieved by HIP, whereas more homogeneous properties can be assured by PLS.

KW - Bioceramic

KW - Mechanical properties

KW - Porosity

KW - Silicon nitride

UR - http://www.scopus.com/inward/record.url?scp=34249696101&partnerID=8YFLogxK

U2 - 10.4028/0-87849-973-3.242

DO - 10.4028/0-87849-973-3.242

M3 - Article

AN - SCOPUS:34249696101

SN - 1013-9826

VL - 290

SP - 242

EP - 245

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -

Comparison of silicon nitrides with carbon additions prepared by two different sintering methods

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this