Investigations on the influence of thickness and preform structure on the mechanical performance of novel textile composites with woven Kevlar® fabric reinforcement and poly methylmethacrylate (Elium®) matrix

Elium (novel methyl methacrylate (MMA)) resin is a liquid thermoplastic resin curable at room temperature and a possible replacement for epoxies. The main objective of this work is to evaluate the mechanical characteristics of novel Kevlar fabric reinforced Elium composites with different thicknesses. The plain-woven structure Kevlar/Elium laminates were manufactured with 1.5 mm and 2.5 mm thicknesses through vacuum-assisted resin infusion moulding, where 8 and 12 layers of woven fabrics were used, respectively. The effect of laminate thickness was measured in terms of mechanical (tensile, flexural, shear, and dynamic mechanical analysis (DMA)) and physical (density and fibre volume fraction (FVF)) characteristics. The density of the laminates was found in the range of 1.18-1.31 g cm⁻³. FVF was 50.69 and 52.27% for 1.5 and 2.5 mm thick laminates, respectively. The composite with 1.5 mm thickness exhibited the highest tensile strength (667.9 MPa) and flexural strength of 330.7 MPa. Conversely, the highest interlaminar shear strength measured for 2.5 mm thick laminate is 16.5 MPa. The DMA analysis recorded the highest storage and loss modulus for 2.5 mm thickness laminates. The fractography analysis confirmed the quantified experimental observation of excessive interface debonding and delamination. Elium composites may be suitable for high-end structural applications, including marine and aircraft structures.