On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre

J. Clifford; J. Mulrooney; G. Dooly; C. Fitzpatrick; E. Lewis; E. Merlone-Borla; G. Flavia

doi:10.1109/ICSENS.2008.4716590

On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre

J. Clifford
, J. Mulrooney
, G. Dooly
, C. Fitzpatrick
, E. Lewis
, E. Merlone-Borla
, G. Flavia

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper describes the investigation of an optical sensor system for the online measurement of carbon dioxide emissions in the exhaust system of a motor vehicle. Current anti-pollution technology installed in motor vehicles fail to meet monitoring requirements as specified by the European Commission. A robust sensor design and construction have made it suitable for installation on the exhaust of a motor vehicle. Results are presented for the sensor output when calibrated to carbon dioxide supplied from a cylinder at the Centro Ricerche Fiat (CRF) research laboratory initially and in-situ in the exhaust of a Fiat Croma (diesel engine) during full scale tests on a roller test bench also at CRF.

Original language	English
Title of host publication	2008 IEEE Sensors, SENSORS 2008
Pages	914-918
Number of pages	5
DOIs	https://doi.org/10.1109/ICSENS.2008.4716590
Publication status	Published - 2008
Event	2008 IEEE Sensors, SENSORS 2008 - Lecce, Italy Duration: 26 Oct 2008 → 29 Oct 2009

Publication series

Name	Proceedings of IEEE Sensors

Conference

Conference	2008 IEEE Sensors, SENSORS 2008
Country/Territory	Italy
City	Lecce
Period	26/10/08 → 29/10/09

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 13 Climate Action

Access to Document

10.1109/ICSENS.2008.4716590

Cite this

@inproceedings{ade33e9bf94246e48b1eebd6de1a2c8c,

title = "On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre",

abstract = "This paper describes the investigation of an optical sensor system for the online measurement of carbon dioxide emissions in the exhaust system of a motor vehicle. Current anti-pollution technology installed in motor vehicles fail to meet monitoring requirements as specified by the European Commission. A robust sensor design and construction have made it suitable for installation on the exhaust of a motor vehicle. Results are presented for the sensor output when calibrated to carbon dioxide supplied from a cylinder at the Centro Ricerche Fiat (CRF) research laboratory initially and in-situ in the exhaust of a Fiat Croma (diesel engine) during full scale tests on a roller test bench also at CRF.",

author = "J. Clifford and J. Mulrooney and G. Dooly and C. Fitzpatrick and E. Lewis and E. Merlone-Borla and G. Flavia",

year = "2008",

doi = "10.1109/ICSENS.2008.4716590",

language = "English",

isbn = "9781424425808",

series = "Proceedings of IEEE Sensors",

pages = "914--918",

booktitle = "2008 IEEE Sensors, SENSORS 2008",

note = "2008 IEEE Sensors, SENSORS 2008 ; Conference date: 26-10-2008 Through 29-10-2009",

}

Clifford, J, Mulrooney, J, Dooly, G , Fitzpatrick, C , Lewis, E, Merlone-Borla, E & Flavia, G 2008, On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre. in 2008 IEEE Sensors, SENSORS 2008., 4716590, Proceedings of IEEE Sensors, pp. 914-918, 2008 IEEE Sensors, SENSORS 2008, Lecce, Italy, 26/10/08. https://doi.org/10.1109/ICSENS.2008.4716590

TY - GEN

T1 - On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre

AU - Clifford, J.

AU - Mulrooney, J.

AU - Dooly, G.

AU - Fitzpatrick, C.

AU - Lewis, E.

AU - Merlone-Borla, E.

AU - Flavia, G.

PY - 2008

Y1 - 2008

N2 - This paper describes the investigation of an optical sensor system for the online measurement of carbon dioxide emissions in the exhaust system of a motor vehicle. Current anti-pollution technology installed in motor vehicles fail to meet monitoring requirements as specified by the European Commission. A robust sensor design and construction have made it suitable for installation on the exhaust of a motor vehicle. Results are presented for the sensor output when calibrated to carbon dioxide supplied from a cylinder at the Centro Ricerche Fiat (CRF) research laboratory initially and in-situ in the exhaust of a Fiat Croma (diesel engine) during full scale tests on a roller test bench also at CRF.

AB - This paper describes the investigation of an optical sensor system for the online measurement of carbon dioxide emissions in the exhaust system of a motor vehicle. Current anti-pollution technology installed in motor vehicles fail to meet monitoring requirements as specified by the European Commission. A robust sensor design and construction have made it suitable for installation on the exhaust of a motor vehicle. Results are presented for the sensor output when calibrated to carbon dioxide supplied from a cylinder at the Centro Ricerche Fiat (CRF) research laboratory initially and in-situ in the exhaust of a Fiat Croma (diesel engine) during full scale tests on a roller test bench also at CRF.

UR - https://www.scopus.com/pages/publications/67649959109

U2 - 10.1109/ICSENS.2008.4716590

DO - 10.1109/ICSENS.2008.4716590

M3 - Conference contribution

AN - SCOPUS:67649959109

SN - 9781424425808

T3 - Proceedings of IEEE Sensors

SP - 914

EP - 918

BT - 2008 IEEE Sensors, SENSORS 2008

T2 - 2008 IEEE Sensors, SENSORS 2008

Y2 - 26 October 2008 through 29 October 2009

ER -

On board measurement of carbon dioxide exhaust car emissions using a mid-infrared optical based fibre

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this