Plasma surface treatment of aerospace materials for enhanced adhesive bonding

W. Leahy, V. Barron, M. Buggy, T. Young, A. Mas, F. Schue, T. McCabe, M. Bridge

Research output: Contribution to journalArticlepeer-review

Abstract

The increased use of polyphenylene sulphide (PPS) and polyetheretherketone based composites for aircraft structures has highlighted the need for reliable methods of bonding these materials to metallic components such as titanium. Both composite and titanium adhesive bonds exhibit poor long-term durability when exposed to hot/wet conditions, aerospace fluids and solvents. As a result, surface treatments are employed to enhance surface energy, surface roughness and alter surface chemistry to provide better long-term durability. In this initial study the adhesive bonding of glass fibre reinforced GFR-PPS and commercially pure titanium was investigated. Prior to bonding, both materials were plasma treated using argon and oxygen gases in a RF discharge. Surface characterisation was carried out to optimise these treatments. Surface energy and wettability were examined using contact angle analysis, surface roughness was examined using scanning electron microscopy and atomic force microscopy, while X-ray photoelectron spectroscopy (XPS) was employed to study the surface chemistry. Bond strengths were determined using lap shear tests. Initial results reveal that these optimum plasma treatments produce a significant increase in bond strength.

Original languageEnglish
Pages (from-to)215-249
Number of pages35
JournalJournal of Adhesion
Volume77
Issue number3
DOIs
Publication statusPublished - 2001

Keywords

  • Adhesive bonding
  • Aerospace materials
  • Composites
  • Plasma treatment
  • Titanium

Fingerprint

Dive into the research topics of 'Plasma surface treatment of aerospace materials for enhanced adhesive bonding'. Together they form a unique fingerprint.

Cite this