Product lifecycle management requirements gathering: Industrial pilot cases

Matthew Daniels; Ivor Lanning; Pezhman Ghadimi; Cathal Heavey; Alan Ryan; Mark Southern

doi:10.3182/20130619-3-RU-3018.00434

Product lifecycle management requirements gathering: Industrial pilot cases

Matthew Daniels
, Ivor Lanning
, Pezhman Ghadimi
, Cathal Heavey
, Alan Ryan
, Mark Southern

University of Limerick

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Product Lifecycle management (PLM) is a concept that aims to integrate the various processes and phases involved during a typical product lifecycle. This paper reports on the capture of requirements for PLM from five Industrial Partners in a FP7 project "advanced Platform for manufacturing engineering and Product Lifecycle Management" (amePLM). The objective of amePLM is to develop a software platform which will provide a collaborative extensible engineering platform that will leverage state-of-the art research on semantics, heuristics and visualization. The five Industrial Partners in amePLM vary in size (micro, SME to large) and by sector, from electronics, healthcare, advanced technology to engineering services. Independent of the company size and the sector it operates in the PLM requirements gathering reported in this paper shows that there are deficiencies in the support for collaboration, project management and visualization in the current PLM tools used by these companies. To capture requirements from the companies a new PLM requirements gathering methodology was developed which is reported on in the paper.

Original language	English
Title of host publication	7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings
Publisher	IFAC Secretariat
Pages	1750-1755
Number of pages	6
Edition	9
ISBN (Print)	9783902823359
DOIs	https://doi.org/10.3182/20130619-3-RU-3018.00434
Publication status	Published - 2013
Event	7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Saint Petersburg, Russian Federation Duration: 19 Jun 2013 → 21 Jun 2013

Publication series

Name	IFAC Proceedings Volumes (IFAC-PapersOnline)
Number	9
Volume	46
ISSN (Print)	1474-6670

Conference

Conference	7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013
Country/Territory	Russian Federation
City	Saint Petersburg
Period	19/06/13 → 21/06/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

PLM
Pilot case
Product lifecycle management
Requirement gathering
SME

Access to Document

10.3182/20130619-3-RU-3018.00434

Cite this

Daniels, M., Lanning, I., Ghadimi, P., Heavey, C., Ryan, A., & Southern, M. (2013). Product lifecycle management requirements gathering: Industrial pilot cases. In 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings (9 ed., pp. 1750-1755). (IFAC Proceedings Volumes (IFAC-PapersOnline); Vol. 46, No. 9). IFAC Secretariat. https://doi.org/10.3182/20130619-3-RU-3018.00434

@inproceedings{13ef1f101b744bc39ab7af1334a5083f,

title = "Product lifecycle management requirements gathering: Industrial pilot cases",

abstract = "Product Lifecycle management (PLM) is a concept that aims to integrate the various processes and phases involved during a typical product lifecycle. This paper reports on the capture of requirements for PLM from five Industrial Partners in a FP7 project {"}advanced Platform for manufacturing engineering and Product Lifecycle Management{"} (amePLM). The objective of amePLM is to develop a software platform which will provide a collaborative extensible engineering platform that will leverage state-of-the art research on semantics, heuristics and visualization. The five Industrial Partners in amePLM vary in size (micro, SME to large) and by sector, from electronics, healthcare, advanced technology to engineering services. Independent of the company size and the sector it operates in the PLM requirements gathering reported in this paper shows that there are deficiencies in the support for collaboration, project management and visualization in the current PLM tools used by these companies. To capture requirements from the companies a new PLM requirements gathering methodology was developed which is reported on in the paper.",

keywords = "PLM, Pilot case, Product lifecycle management, Requirement gathering, SME",

author = "Matthew Daniels and Ivor Lanning and Pezhman Ghadimi and Cathal Heavey and Alan Ryan and Mark Southern",

year = "2013",

doi = "10.3182/20130619-3-RU-3018.00434",

language = "English",

isbn = "9783902823359",

series = "IFAC Proceedings Volumes (IFAC-PapersOnline)",

publisher = "IFAC Secretariat",

number = "9",

pages = "1750--1755",

booktitle = "7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings",

edition = "9",

note = "7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 ; Conference date: 19-06-2013 Through 21-06-2013",

}

Daniels, M, Lanning, I, Ghadimi, P, Heavey, C, Ryan, A & Southern, M 2013, Product lifecycle management requirements gathering: Industrial pilot cases. in 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings. 9 edn, IFAC Proceedings Volumes (IFAC-PapersOnline), no. 9, vol. 46, IFAC Secretariat, pp. 1750-1755, 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013, Saint Petersburg, Russian Federation, 19/06/13. https://doi.org/10.3182/20130619-3-RU-3018.00434

Product lifecycle management requirements gathering: Industrial pilot cases. / Daniels, Matthew; Lanning, Ivor; Ghadimi, Pezhman et al.
7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings. 9. ed. IFAC Secretariat, 2013. p. 1750-1755 (IFAC Proceedings Volumes (IFAC-PapersOnline); Vol. 46, No. 9).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Product lifecycle management requirements gathering

T2 - 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013

AU - Daniels, Matthew

AU - Lanning, Ivor

AU - Ghadimi, Pezhman

AU - Heavey, Cathal

AU - Ryan, Alan

AU - Southern, Mark

PY - 2013

Y1 - 2013

N2 - Product Lifecycle management (PLM) is a concept that aims to integrate the various processes and phases involved during a typical product lifecycle. This paper reports on the capture of requirements for PLM from five Industrial Partners in a FP7 project "advanced Platform for manufacturing engineering and Product Lifecycle Management" (amePLM). The objective of amePLM is to develop a software platform which will provide a collaborative extensible engineering platform that will leverage state-of-the art research on semantics, heuristics and visualization. The five Industrial Partners in amePLM vary in size (micro, SME to large) and by sector, from electronics, healthcare, advanced technology to engineering services. Independent of the company size and the sector it operates in the PLM requirements gathering reported in this paper shows that there are deficiencies in the support for collaboration, project management and visualization in the current PLM tools used by these companies. To capture requirements from the companies a new PLM requirements gathering methodology was developed which is reported on in the paper.

AB - Product Lifecycle management (PLM) is a concept that aims to integrate the various processes and phases involved during a typical product lifecycle. This paper reports on the capture of requirements for PLM from five Industrial Partners in a FP7 project "advanced Platform for manufacturing engineering and Product Lifecycle Management" (amePLM). The objective of amePLM is to develop a software platform which will provide a collaborative extensible engineering platform that will leverage state-of-the art research on semantics, heuristics and visualization. The five Industrial Partners in amePLM vary in size (micro, SME to large) and by sector, from electronics, healthcare, advanced technology to engineering services. Independent of the company size and the sector it operates in the PLM requirements gathering reported in this paper shows that there are deficiencies in the support for collaboration, project management and visualization in the current PLM tools used by these companies. To capture requirements from the companies a new PLM requirements gathering methodology was developed which is reported on in the paper.

KW - PLM

KW - Pilot case

KW - Product lifecycle management

KW - Requirement gathering

KW - SME

UR - https://www.scopus.com/pages/publications/84884308378

U2 - 10.3182/20130619-3-RU-3018.00434

DO - 10.3182/20130619-3-RU-3018.00434

M3 - Conference contribution

AN - SCOPUS:84884308378

SN - 9783902823359

T3 - IFAC Proceedings Volumes (IFAC-PapersOnline)

SP - 1750

EP - 1755

BT - 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings

PB - IFAC Secretariat

Y2 - 19 June 2013 through 21 June 2013

ER -

Daniels M, Lanning I, Ghadimi P, Heavey C, Ryan A , Southern M. Product lifecycle management requirements gathering: Industrial pilot cases. In 7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 - Proceedings. 9 ed. IFAC Secretariat. 2013. p. 1750-1755. (IFAC Proceedings Volumes (IFAC-PapersOnline); 9). doi: 10.3182/20130619-3-RU-3018.00434

Product lifecycle management requirements gathering: Industrial pilot cases

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this