The effect of temperature and amplitude on dislocation structures in cyclically deformed pure aluminium

P. Charsley; U. Bangert; L. J. Appleby

doi:10.1016/0921-5093(89)90311-0

The effect of temperature and amplitude on dislocation structures in cyclically deformed pure aluminium

P. Charsley, U. Bangert, L. J. Appleby

University of Surrey

Research output: Contribution to journal › Article › peer-review

Abstract

Pure polycrystalline aluminium specimens have been cyclically deformed at total strain amplitudes in the range 2 × 10^-4 to 1.4 × 10^-3 at temperatures of 77 K, 163 K and 223 K. Transmission electron microscopy studies of dislocation configurations have been made. Wall structures including persistent slip band ladder-type structures have been observed within limited ranges of temperature and amplitude. It has been found that wall structures are relatively unstable at higher temperatures. Significant differences in detail are found in comparison with copper in particular. For particular configurations a larger number of Burgers' vectors are observed compared with polycrystalline copper. This results in differences in the homologous temperature ranges within which particular configurations are observed, when comparing aluminium with copper, and it is suggested that this arises mainly because of differences in the stacking fault energy, which determines the stress required for dislocation intersection.

Original language	English
Pages (from-to)	231-236
Number of pages	6
Journal	Materials Science and Engineering: A
Volume	113
Issue number	C
DOIs	https://doi.org/10.1016/0921-5093(89)90311-0
Publication status	Published - 1 Jul 1989
Externally published	Yes

Access to Document

10.1016/0921-5093(89)90311-0

Cite this

@article{1c61f11eadc24d6f9d60dc9e21ad7227,

title = "The effect of temperature and amplitude on dislocation structures in cyclically deformed pure aluminium",

abstract = "Pure polycrystalline aluminium specimens have been cyclically deformed at total strain amplitudes in the range 2 × 10-4 to 1.4 × 10-3 at temperatures of 77 K, 163 K and 223 K. Transmission electron microscopy studies of dislocation configurations have been made. Wall structures including persistent slip band ladder-type structures have been observed within limited ranges of temperature and amplitude. It has been found that wall structures are relatively unstable at higher temperatures. Significant differences in detail are found in comparison with copper in particular. For particular configurations a larger number of Burgers' vectors are observed compared with polycrystalline copper. This results in differences in the homologous temperature ranges within which particular configurations are observed, when comparing aluminium with copper, and it is suggested that this arises mainly because of differences in the stacking fault energy, which determines the stress required for dislocation intersection.",

author = "P. Charsley and U. Bangert and Appleby, {L. J.}",

year = "1989",

month = jul,

day = "1",

doi = "10.1016/0921-5093(89)90311-0",

language = "English",

volume = "113",

pages = "231--236",

journal = "Materials Science and Engineering: A",

issn = "0921-5093",

number = "C",

}

TY - JOUR

T1 - The effect of temperature and amplitude on dislocation structures in cyclically deformed pure aluminium

AU - Charsley, P.

AU - Bangert, U.

AU - Appleby, L. J.

PY - 1989/7/1

Y1 - 1989/7/1

N2 - Pure polycrystalline aluminium specimens have been cyclically deformed at total strain amplitudes in the range 2 × 10-4 to 1.4 × 10-3 at temperatures of 77 K, 163 K and 223 K. Transmission electron microscopy studies of dislocation configurations have been made. Wall structures including persistent slip band ladder-type structures have been observed within limited ranges of temperature and amplitude. It has been found that wall structures are relatively unstable at higher temperatures. Significant differences in detail are found in comparison with copper in particular. For particular configurations a larger number of Burgers' vectors are observed compared with polycrystalline copper. This results in differences in the homologous temperature ranges within which particular configurations are observed, when comparing aluminium with copper, and it is suggested that this arises mainly because of differences in the stacking fault energy, which determines the stress required for dislocation intersection.

AB - Pure polycrystalline aluminium specimens have been cyclically deformed at total strain amplitudes in the range 2 × 10-4 to 1.4 × 10-3 at temperatures of 77 K, 163 K and 223 K. Transmission electron microscopy studies of dislocation configurations have been made. Wall structures including persistent slip band ladder-type structures have been observed within limited ranges of temperature and amplitude. It has been found that wall structures are relatively unstable at higher temperatures. Significant differences in detail are found in comparison with copper in particular. For particular configurations a larger number of Burgers' vectors are observed compared with polycrystalline copper. This results in differences in the homologous temperature ranges within which particular configurations are observed, when comparing aluminium with copper, and it is suggested that this arises mainly because of differences in the stacking fault energy, which determines the stress required for dislocation intersection.

UR - http://www.scopus.com/inward/record.url?scp=0024700624&partnerID=8YFLogxK

U2 - 10.1016/0921-5093(89)90311-0

DO - 10.1016/0921-5093(89)90311-0

M3 - Article

AN - SCOPUS:0024700624

SN - 0921-5093

VL - 113

SP - 231

EP - 236

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

IS - C

ER -

The effect of temperature and amplitude on dislocation structures in cyclically deformed pure aluminium

Abstract

Access to Document

Other files and links

Fingerprint

Cite this